
ID: ZTN1029
This Zetafax technical note applies to:
Zetafax supports the following devices:
* contact your local distributor for details of specific board models supported
If you already have a modem and are not sure whether it is compatible with Zetafax, then you can do the following to check.
Connect the device to one of your COM ports or configure it so that there is a COM port presented to the system.
Open Hyperterminal and choose to connect to the COM port directly.
You should now be able to communicate with the device directly using standard AT commands. The following command will report what classes the device supports.
AT+FCLASS=?
Result codes to this command will indicate what classes the device supports
|
0 |
= data mode |
|
1 |
= fax class 1 |
|
1.0 |
= fax class 1.0 |
|
2 |
= fax class 2 |
|
2.0 |
= fax class 2.0 |
|
8 |
= voice |
If the device does not include 1, 1.0, 2 or 2.0 as part of the result code then Zetafax will not be able to work with the device.
For additional information on fax devices, please see the following Zetafax technical notes:
ZTN1000-PRB: Modem trouble shooting guide for Zetafax.
ZTN1003-INFO: Modem hang-up status codes for class 2.0 fax.
ZTN1065-INFO Enabling detailed logging within Zetafax.
ZTN1036-HOWTO: Configuring Zetafax with USR Fax modems.
ZTN1038-FIX: Inward routing fails with ZYXEL 2834I ISDN modem if configured to use Class 1.
ZTN1039-FIX: Errors using USR Courier V.Everything with Zetafax.
ZTN1040-FIX: Errors using Zetafax with Equinox Analogue modem pool.
Last reviewed: 7 October 2005 (GC/EB)
Date Published: 11 May 2000 (GC/GW)